eryn/kiibohd-controller
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Fix whitespace

Browse source 
Use a consistent standard - Tabs in front for indenting, spaces after for anything else. This way everything stays nice and lined up while also letting users change there prefered indent level. Most of the new files from Haata where already in this format.
This commit is contained in:
Rowan Decker 2015-03-08 18:40:01 -07:00
parent a6fdeb47ea
commit 1392571bd7
45 changed files with 3258 additions and 3258 deletions
Download patch file Download diff file Expand all files Collapse all files

2
Scan/ADCTest/analog.c
View file

@ -57,7 +57,7 @@ void analog_init(void)
uint32_t num;
VREF_TRM = 0x60;
VREF_SC = 0xE1; // enable 1.2 volt ref
VREF_SC = 0xE1; // enable 1.2 volt ref
if (analog_config_bits == 8) {
ADC0_CFG1 = ADC_CFG1_24MHZ + ADC_CFG1_MODE(0);

8
Scan/ADCTest/scan_loop.c
View file

@ -69,11 +69,11 @@ char scanCLIDictName[] = "ADC Test Module Commands";
const CLIDictItem scanCLIDict[] = {
#if defined(_mk20dx128_) || defined(_mk20dx256_) || defined(_mk20dx256vlh7_) // ARM
{ "adc", "Read the specified number of values from the ADC at the given pin: <pin> [# of reads]"
NL "\t\t See \033[35mLib/pin_map.teensy3\033[0m for ADC0 channel number.", cliFunc_adc },
NL "\t\t See \033[35mLib/pin_map.teensy3\033[0m for ADC0 channel number.", cliFunc_adc },
{ "adcInit", "Intialize/calibrate ADC: <ADC Resolution> <Vref> <Hardware averaging samples>"
NL "\t\tADC Resolution -> 8, 10, 12, 16 (bit)"
NL "\t\t Vref -> 0 (1.2 V), 1 (External)"
NL "\t\tHw Avg Samples -> 0 (disabled), 4, 8, 16, 32", cliFunc_adcInit },
NL "\t\tADC Resolution -> 8, 10, 12, 16 (bit)"
NL "\t\t Vref -> 0 (1.2 V), 1 (External)"
NL "\t\tHw Avg Samples -> 0 (disabled), 4, 8, 16, 32", cliFunc_adcInit },
#endif
#if defined(_mk20dx256_) || defined(_mk20dx256vlh7_) // DAC is only supported on Teensy 3.1
{ "dac", "Set DAC output value, from 0 to 4095 (1/4096 Vref to Vref).", cliFunc_dac },

8
Scan/BudKeypad/matrix.h
View file

@ -1,15 +1,15 @@
/* Copyright (C) 2011 by Jacob Alexander
*
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
@ -50,7 +50,7 @@ static const uint8_t matrix_pinout[][MAX_ROW_SIZE + 1] = {
// Just layout the matrix by rows and columns
// Usually you'll want to set the scanMode above to scanDual or scanCol_powrRow/scanRow_powrCol
// The mode allows for optimization in the kind of scanning algorithms that are done
//
//
// The key numbers are used to translate into the keymap table (array) (and always start from 1, not 0).
// Thus if a row doesn't use all the key positions, you can denote it as 0, which will be ignored/skipped on each scan
// See the keymap.h file for the various preconfigured arrays.

4
Scan/DPH/scan_loop.c
View file

@ -609,7 +609,7 @@ void recovery( uint8_t on )
PORTD &= ~D_MASK;
PORTE &= ~E_MASK;
DDRB |= (1 << RECOVERY_SINK); // SINK pull
DDRB |= (1 << RECOVERY_SINK); // SINK pull
PORTB |= (1 << RECOVERY_CONTROL);
PORTB |= (1 << RECOVERY_SOURCE); // SOURCE high
DDRB |= (1 << RECOVERY_SOURCE);
@ -619,7 +619,7 @@ void recovery( uint8_t on )
PORTB &= ~(1 << RECOVERY_CONTROL);
DDRB &= ~(1 << RECOVERY_SOURCE);
PORTB &= ~(1 << RECOVERY_SOURCE); // SOURCE low
DDRB &= ~(1 << RECOVERY_SINK); // SINK high-imp
DDRB &= ~(1 << RECOVERY_SINK); // SINK high-imp
}
}

2
Scan/EpsonQX-10/scan_loop.c
View file

@ -149,7 +149,7 @@ inline void Scan_setup()
// Setup the the USART interface for keyboard data input
// Setup baud rate
// 16 MHz / ( 16 * Baud ) = UBRR
// Baud <- 1200 as per the spec (see datasheet archives), rounding to 1200.1 (as that's as accurate as the timer can be)

4
Scan/FACOM6684/scan_loop.c
View file

@ -103,7 +103,7 @@ ISR(USART1_RX_vect)
inline void Scan_setup()
{
// Setup the the USART interface for keyboard data input
// Setup baud rate
// 16 MHz / ( 16 * Baud ) = UBRR
// Baud: 4817 -> 16 MHz / ( 16 * 4817 ) = 207.5981
@ -200,7 +200,7 @@ void removeKeyValue( uint8_t keyValue )
}
}
// Send data
// Send data
uint8_t Scan_sendData( uint8_t dataPayload )
{
// Debug

2
Scan/HP150/scan_loop.c
View file

@ -239,7 +239,7 @@ inline uint8_t Scan_loop()
return 0;
}
// Send data
// Send data
uint8_t Scan_sendData( uint8_t dataPayload )
{
return 0;

6
Scan/HeathZenith/matrix.h
View file

@ -1,15 +1,15 @@
/* Copyright (C) 2011 by Jacob Alexander
*
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE

6
Scan/IBMConvertible/matrix.h
View file

@ -1,15 +1,15 @@
/* Copyright (C) 2012 by Jacob Alexander
*
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE

2
Scan/MicroSwitch8304/scan_loop.c
View file

@ -180,7 +180,7 @@ ISR(USART1_RX_vect)
sei(); // Re-enable Interrupts
}
// Send data
// Send data
//
// Keyboard Input Guide for Micro Switch 8304
// 0xBX is for LED F1,F2,Over Type,Lock

2
Scan/SonyNEWS/scan_loop.c
View file

@ -92,7 +92,7 @@ inline void Scan_setup()
// Configured as a Pull-up Input - This pin "can" be read as well, it will go to GND when the "Power On" switch is pressed, and will read ~5V otherwise
// XXX Currently not used by the controller
POWR_DDR &= ~(1 << POWR_POS);
POWR_PORT |= (1 << POWR_POS);
POWR_PORT |= (1 << POWR_POS);
// Reset the keyboard before scanning, we might be in a wierd state
scan_resetKeyboard();

14
Scan/matrix/matrix_scan.c
View file

@ -39,7 +39,7 @@
// ----- Macros -----
// -- pinSetup Macros --
#define REG_SET(reg) reg |= (1 << ( matrix[row*(MAX_ROW_SIZE+1)+col] % 10 ) ) // Modulo 10 for the define offset for each pin set 12 or 32 -> shift of 2
#define REG_SET(reg) reg |= (1 << ( matrix[row*(MAX_ROW_SIZE+1)+col] % 10 ) ) // Modulo 10 for the define offset for each pin set 12 or 32 -> shift of 2
#define REG_UNSET(reg) reg &= ~(1 << ( matrix[row*(MAX_ROW_SIZE+1)+col] % 10 ) )
#define PIN_SET(pin,scan,direction) \
@ -57,7 +57,7 @@
case scanDual: \
REG_SET(port##pin); break; \
case scanCol_powrRow: REG_UNSET(ddr##pin); REG_UNSET(DDR##pin); \
REG_SET(port##pin); REG_SET(PORT##pin); break; \
REG_SET(port##pin); REG_SET(PORT##pin); break; \
case powrRow: break; \
case powrCol: REG_SET(ddr##pin); REG_SET(DDR##pin); \
REG_SET(port##pin); REG_SET(PORT##pin); break; \
@ -72,9 +72,9 @@
case scanDual: \
REG_SET(port##pin); break; \
case scanCol_powrRow: REG_SET(ddr##pin); REG_SET(DDR##pin); \
REG_UNSET(port##pin); REG_UNSET(PORT##pin); break; \
REG_UNSET(port##pin); REG_UNSET(PORT##pin); break; \
case powrRow: REG_SET(ddr##pin); REG_SET(DDR##pin); \
REG_SET(port##pin); REG_SET(PORT##pin); break; \
REG_SET(port##pin); REG_SET(PORT##pin); break; \
case powrCol: break; \
} \
break
@ -261,7 +261,7 @@ void matrix_pinSetup( uint8_t *matrix, uint8_t scanType )
if ( showDebug == 0 ) // Only show once
{
matrix_debugPins();
}
}
}
// Scans the given matrix determined by the scanMode method
@ -380,7 +380,7 @@ inline void matrix_scan( uint8_t *matrix, uint8_t *detectArray )
_delay_us( 1 );
col = 1;
row = 1;
for ( ; col < (MAX_ROW_SIZE+1); col++ ) for ( ; row < (MAX_COL_SIZE+1); row++ )
for ( ; col < (MAX_ROW_SIZE+1); col++ ) for ( ; row < (MAX_COL_SIZE+1); row++ )
{
// Scan over the pins for each of the rows, and using the pin alias to determine which pin to set
// (e.g. / 10 is for the pin name (A,B,C,etc.) and % 10 is for the position of the pin (A1,A2,etc.))
@ -404,4 +404,4 @@ inline void matrix_scan( uint8_t *matrix, uint8_t *detectArray )
}
#endif
}

2
Scan/matrix/scan_loop.h
View file

@ -46,7 +46,7 @@
// NOTE: Highest Bit: Valid keypress (0x80 is valid keypress)
// Other Bits: Pressed state sample counter
extern uint8_t KeyIndex_Array [KEYBOARD_KEYS + 1];
static const uint8_t KeyIndex_Size = KEYBOARD_KEYS;
static const uint8_t KeyIndex_Size = KEYBOARD_KEYS;
extern volatile uint8_t KeyIndex_Buffer[KEYBOARD_BUFFER];
extern volatile uint8_t KeyIndex_BufferUsed;