More work on mk20dx128vlf5 port.

- Basic compilation and loading is working
- LED can be turned on/off
- USB not yet working

Output/pjrcUSB/arm/usb_desc.c

@@ -424,16 +424,16 @@ const usb_descriptor_list_t usb_descriptor_list[] = {
 // 0x19 = Recieve only
 // 0x15 = Transmit only
 // 0x1D = Transmit & Recieve
-// 
-const uint8_t usb_endpoint_config_table[NUM_ENDPOINTS] = 
+//
+const uint8_t usb_endpoint_config_table[NUM_ENDPOINTS] =
 {
-	0x00, 0x15, 0x19, 0x15, 0x00, 0x00, 0x00, 0x00, 
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
+	0x00, 0x15, 0x19, 0x15, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 };
 #endif
 
 
-const uint8_t usb_endpoint_config_table[NUM_ENDPOINTS] = 
+const uint8_t usb_endpoint_config_table[NUM_ENDPOINTS] =
 {
 #if (defined(ENDPOINT1_CONFIG) && NUM_ENDPOINTS >= 1)
 	ENDPOINT1_CONFIG,

Output/pjrcUSB/arm/usb_desc.h

@@ -83,38 +83,38 @@ let me know?  http://forum.pjrc.com/forums/4-Suggestions-amp-Bug-Reports
 
 
 
-#define DEVICE_CLASS		0xEF
-#define DEVICE_SUBCLASS	0x02
-#define DEVICE_PROTOCOL	0x01
-#define EP0_SIZE		64
-#define NUM_ENDPOINTS		6
-#define NUM_USB_BUFFERS	30
-#define NUM_INTERFACE		4
+#define DEVICE_CLASS            0xEF
+#define DEVICE_SUBCLASS         0x02
+#define DEVICE_PROTOCOL         0x01
+#define EP0_SIZE                64
+#define NUM_ENDPOINTS           6
+#define NUM_USB_BUFFERS         30
+#define NUM_INTERFACE           4
 
-#define CDC_IAD_DESCRIPTOR	1
-#define CDC_STATUS_INTERFACE	0
-#define CDC_DATA_INTERFACE	1	// Serial
-#define CDC_ACM_ENDPOINT	2
-#define CDC_RX_ENDPOINT       3
-#define CDC_TX_ENDPOINT       4
-#define CDC_ACM_SIZE          16
-#define CDC_RX_SIZE           64
-#define CDC_TX_SIZE           64
+#define CDC_IAD_DESCRIPTOR      1
+#define CDC_STATUS_INTERFACE    0
+#define CDC_DATA_INTERFACE      1 // Serial
+#define CDC_ACM_ENDPOINT        2
+#define CDC_RX_ENDPOINT         3
+#define CDC_TX_ENDPOINT         4
+#define CDC_ACM_SIZE            16
+#define CDC_RX_SIZE             64
+#define CDC_TX_SIZE             64
 
-#define KEYBOARD_INTERFACE    2	// Keyboard
-#define KEYBOARD_ENDPOINT     1
-#define KEYBOARD_SIZE         8
-#define KEYBOARD_INTERVAL     1
+#define KEYBOARD_INTERFACE      2 // Keyboard
+#define KEYBOARD_ENDPOINT       1
+#define KEYBOARD_SIZE           8
+#define KEYBOARD_INTERVAL       1
 
-#define MOUSE_INTERFACE       3	// Mouse
-#define MOUSE_ENDPOINT        5
-#define MOUSE_SIZE            8
-#define MOUSE_INTERVAL        2
+#define MOUSE_INTERFACE         3 // Mouse
+#define MOUSE_ENDPOINT          5
+#define MOUSE_SIZE              8
+#define MOUSE_INTERVAL          2
 
-#define JOYSTICK_INTERFACE    4	// Joystick
-#define JOYSTICK_ENDPOINT     6
-#define JOYSTICK_SIZE         16
-#define JOYSTICK_INTERVAL     1
+#define JOYSTICK_INTERFACE      4 // Joystick
+#define JOYSTICK_ENDPOINT       6
+#define JOYSTICK_SIZE           16
+#define JOYSTICK_INTERVAL       1
 
 #define KEYBOARD_DESC_OFFSET	(9+8 + 9+5+5+4+5+7+9+7+7 + 9)
 #define MOUSE_DESC_OFFSET	(9+8 + 9+5+5+4+5+7+9+7+7 + 9+9+7 + 9)

Output/pjrcUSB/arm/usb_dev.c

@@ -845,7 +845,7 @@ void usb_isr(void)
 		table[index(0, RX, ODD)].addr = ep0_rx1_buf;
 		table[index(0, TX, EVEN)].desc = 0;
 		table[index(0, TX, ODD)].desc = 0;
-		
+
 		// activate endpoint 0
 		USB0_ENDPT0 = USB_ENDPT_EPRXEN | USB_ENDPT_EPTXEN | USB_ENDPT_EPHSHK;
 

Output/pjrcUSB/arm/usb_mem.h

@@ -10,10 +10,10 @@
  * permit persons to whom the Software is furnished to do so, subject to
  * the following conditions:
  *
- * 1. The above copyright notice and this permission notice shall be 
+ * 1. The above copyright notice and this permission notice shall be
  * included in all copies or substantial portions of the Software.
  *
- * 2. If the Software is incorporated into a build system that allows 
+ * 2. If the Software is incorporated into a build system that allows
  * selection among a list of target devices, then similar target
  * devices manufactured by PJRC.COM must be included in the list of
  * target devices and selectable in the same manner.
@@ -43,7 +43,5 @@ typedef struct usb_packet_struct {
 usb_packet_t * usb_malloc(void);
 void usb_free(usb_packet_t *p);
 
-
-
-
 #endif
+

Output/pjrcUSB/arm/usb_serial.c

@@ -1,6 +1,7 @@
 /* Teensyduino Core Library
  * http://www.pjrc.com/teensy/
  * Copyright (c) 2013 PJRC.COM, LLC.
+ * Modified by Jacob Alexander 2013-2014
  *
  * Permission is hereby granted, free of charge, to any person obtaining
  * a copy of this software and associated documentation files (the
@@ -10,10 +11,10 @@
  * permit persons to whom the Software is furnished to do so, subject to
  * the following conditions:
  *
- * 1. The above copyright notice and this permission notice shall be 
+ * 1. The above copyright notice and this permission notice shall be
  * included in all copies or substantial portions of the Software.
  *
- * 2. If the Software is incorporated into a build system that allows 
+ * 2. If the Software is incorporated into a build system that allows
  * selection among a list of target devices, then similar target
  * devices manufactured by PJRC.COM must be included in the list of
  * target devices and selectable in the same manner.

Output/pjrcUSB/arm/usb_serial.h

@@ -10,10 +10,10 @@
  * permit persons to whom the Software is furnished to do so, subject to
  * the following conditions:
  *
- * 1. The above copyright notice and this permission notice shall be 
+ * 1. The above copyright notice and this permission notice shall be
  * included in all copies or substantial portions of the Software.
  *
- * 2. If the Software is incorporated into a build system that allows 
+ * 2. If the Software is incorporated into a build system that allows
  * selection among a list of target devices, then similar target
  * devices manufactured by PJRC.COM must be included in the list of
  * target devices and selectable in the same manner.