Intial commit of the SonyNEWS scan module

- Keyboard output fully working
- Not all of the features are implemented yet (input, speaker, or power
  detection)
- There is no plan for mouse support

Scan/SonyNEWS/scan_loop.c

@@ -0,0 +1,229 @@
+/* Copyright (C) 2011 by Jacob Alexander
+ * 
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ * 
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ * 
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+// ----- Includes -----
+
+// AVR Includes
+#include <avr/interrupt.h>
+#include <avr/io.h>
+#include <util/delay.h>
+
+// Project Includes
+#include <led.h>
+#include <print.h>
+
+// Local Includes
+#include "scan_loop.h"
+
+
+
+// ----- Defines -----
+
+// Pinout Defines
+#define RESET_PORT PORTB
+#define RESET_DDR   DDRD
+#define RESET_PIN      0
+
+
+// ----- Macros -----
+
+// Make sure we haven't overflowed the buffer
+#define bufferAdd(byte) \
+		if ( KeyIndex_BufferUsed < KEYBOARD_BUFFER ) \
+			KeyIndex_Buffer[KeyIndex_BufferUsed++] = byte
+
+#define UNSET_RESET()   RESET_DDR &= ~(1 << RESET_PIN)
+#define   SET_RESET()   RESET_DDR |=  (1 << RESET_PIN)
+
+
+
+// ----- Variables -----
+
+// Buffer used to inform the macro processing module which keys have been detected as pressed
+volatile uint8_t KeyIndex_Buffer[KEYBOARD_BUFFER];
+volatile uint8_t KeyIndex_BufferUsed;
+
+
+
+// ----- Functions -----
+
+// Setup
+inline void scan_setup()
+{
+	// Setup the the USART interface for keyboard data input
+	
+	// Setup baud rate
+	// 16 MHz / ( 16 * Baud ) = UBRR
+	// Baud <- 0.10450 ms per bit, thus 1000 / 0.10450 = 9569.4
+	// Thus UBRR = 104.50
+	// To deal with the 0.5, setting to double speed, which means UBRR = 209
+	uint16_t baud = 209; // Max setting of 4095
+	UBRR1H = (uint8_t)(baud >> 8);
+	UBRR1L = (uint8_t)baud;
+
+	// Enable Double Read Speed
+	UCSR1A = 0x02;
+
+	// Enable the receiver, transitter, and RX Complete Interrupt
+	UCSR1B = 0x98;
+
+	// Set frame format: 8 data, no stop bits or parity
+	// Asynchrounous USART mode
+	UCSR1C = 0x06;
+
+	// Reset the keyboard before scanning, we might be in a wierd state
+	scan_resetKeyboard();
+}
+
+
+// Main Detection Loop
+// Not needed for the Sony NEWS, this is just a busy loop
+inline uint8_t scan_loop()
+{
+	return 0;
+}
+
+void processKeyValue( uint8_t keyValue )
+{
+	// Detect release condition
+	uint8_t release = keyValue & 0x80;
+
+	// Finalize output buffer
+	// Mask 8th bit
+	keyValue &= 0x7F;
+
+	// Key Release
+	if ( release )
+	{
+		// Check for the released key, and shift the other keys lower on the buffer
+		uint8_t c;
+		for ( c = 0; c < KeyIndex_BufferUsed; c++ )
+		{
+			// Key to release found
+			if ( KeyIndex_Buffer[c] == keyValue )
+			{
+				// Shift keys from c position
+				for ( uint8_t k = c; k < KeyIndex_BufferUsed - 1; k++ )
+					KeyIndex_Buffer[k] = KeyIndex_Buffer[k + 1];
+
+				// Decrement Buffer
+				KeyIndex_BufferUsed--;
+
+				break;
+			}
+		}
+
+		// Error case (no key to release)
+		if ( c == KeyIndex_BufferUsed + 1 )
+		{
+			errorLED( 1 );
+			char tmpStr[6];
+			hexToStr( keyValue, tmpStr );
+			erro_dPrint( "Could not find key to release: ", tmpStr );
+		}
+	}
+	// Press or Repeat Rate
+	else
+	{
+		// Make sure the key isn't already in the buffer
+		for ( uint8_t c = 0; c < KeyIndex_BufferUsed + 1; c++ )
+		{
+			// Key isn't in the buffer yet
+			if ( c == KeyIndex_BufferUsed )
+			{
+				bufferAdd( keyValue );
+				break;
+			}
+
+			// Key already in the buffer
+			if ( KeyIndex_Buffer[c] == keyValue )
+				break;
+		}
+	}
+}
+
+// USART Receive Buffer Full Interrupt
+ISR(USART1_RX_vect)
+{
+	cli(); // Disable Interrupts
+
+	uint8_t keyValue = 0x00;
+
+	// One scancode at a time (fastest interval ~3.95 ms - recorded, should still be ok for interrupt polling)
+	// Read the raw packet from the USART
+	keyValue = UDR1;
+
+	// Debug
+	char tmpStr[6];
+	hexToStr( keyValue, tmpStr );
+	dPrintStrs( tmpStr, " " );
+
+	// Process the scancode
+	processKeyValue( keyValue );
+
+	sei(); // Re-enable Interrupts
+}
+
+// Send data TODO
+//
+// Keyboard Input Guide for Micro Switch 8304
+// 0xBX is for LED F1,F2,Over Type,Lock
+// 0xAX is for LED F3,F8,F9,F10
+// 0x92 resets keyboard (LED off, echo scancode mode off)
+// 0x9E sets echo scancode mode from (0x81 to 0xFF; translates to 0x01 to 0x7F)
+// Other echos: 0x15~0x19 send 0x15~0x19, 0x40 sends 0x40 (as well as 0x44,0x45, 0x80)
+// 0x8C Acks the keyboard and gets 0x70 sent back (delayed)
+uint8_t scan_sendData( uint8_t dataPayload )
+{
+	UDR1 = dataPayload;
+	return 0;
+}
+
+// Signal KeyIndex_Buffer that it has been properly read
+// Not needed as a signal is sent to remove key-presses
+void scan_finishedWithBuffer( void )
+{
+	return;
+}
+
+// Reset/Hold keyboard TODO
+// Warning! This will cause the keyboard to not send any data, so you can't disable with a keypress
+// The Micro Switch 8304 has a dedicated reset line
+void scan_lockKeyboard( void )
+{
+	//UNSET_RESET();
+}
+
+void scan_unlockKeyboard( void )
+{
+	//SET_RESET();
+}
+
+// Reset Keyboard TODO
+void scan_resetKeyboard( void )
+{
+	// Reset command for the 8304
+	//scan_sendData( 0x92 );
+
+	// Empty buffer, now that keyboard has been reset
+	KeyIndex_BufferUsed = 0;
+}
+

Scan/SonyNEWS/scan_loop.h

@@ -0,0 +1,65 @@
+/* Copyright (C) 2011 by Jacob Alexander
+ * 
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ * 
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ * 
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef __SCAN_LOOP_H
+#define __SCAN_LOOP_H
+
+// ----- Includes -----
+
+// Compiler Includes
+#include <stdint.h>
+
+// Local Includes
+
+
+
+// ----- Defines -----
+
+#define KEYBOARD_SIZE 0x68 // 104 - Size of the array space for the keyboard(max index)
+#define KEYBOARD_BUFFER 24 // Max number of key signals to buffer
+
+
+
+// ----- Variables -----
+
+extern volatile     uint8_t KeyIndex_Buffer[KEYBOARD_BUFFER];
+extern volatile     uint8_t KeyIndex_BufferUsed;
+
+
+
+// ----- Functions -----
+
+// Functions used by main.c
+void scan_setup( void );
+uint8_t scan_loop( void );
+
+
+// Functions available to macro.c
+uint8_t scan_sendData( uint8_t dataPayload );
+
+void scan_finishedWithBuffer( void );
+void scan_lockKeyboard( void );
+void scan_unlockKeyboard( void );
+void scan_resetKeyboard( void );
+
+
+#endif // __SCAN_LOOP_H
+

Scan/SonyNEWS/setup.cmake

@@ -0,0 +1,48 @@
+###| CMake Kiibohd Controller Scan Module |###
+#
+# Written by Jacob Alexander in 2011 for the Kiibohd Controller
+#
+# Released into the Public Domain
+#
+# For the Sony NEWS Topre Keyboard
+#
+###
+
+
+###
+# Module C files
+#
+
+set( SCAN_SRCS
+	scan_loop.c
+)
+
+
+###
+# Module H files
+#
+set( SCAN_HDRS
+	scan_loop.h
+)
+
+
+###
+# File Dependency Setup
+#
+ADD_FILE_DEPENDENCIES( scan_loop.c ${SCAN_HDRS} )
+#add_file_dependencies( scan_loop.c ${SCAN_HDRS} )
+#add_file_dependencies( macro.c keymap.h sonynews.h )
+
+
+###
+# Module Specific Options
+#
+add_definitions( -I${HEAD_DIR}/Keymap )
+
+#| Keymap Settings
+add_definitions(
+	-DMODIFIER_MASK=sonynews_ModifierMask
+	-DKEYINDEX_MASK=sonynews_ColemakMap
+	#-DKEYINDEX_MASK=sonynews_DefaultMap
+)
+