144 lines
		
	
	
	
		
			1.6 KiB
		
	
	
	
		
			Text
		
	
	
	
	
	
			
		
		
	
	
			144 lines
		
	
	
	
		
			1.6 KiB
		
	
	
	
		
			Text
		
	
	
	
	
	
Pin Usage
 | 
						|
=========
 | 
						|
 | 
						|
mk20dx256vlh7
 | 
						|
 | 
						|
 ----
 | 
						|
|Keys|
 | 
						|
 ----
 | 
						|
 | 
						|
* Strobe (Columns)
 | 
						|
 | 
						|
TODO
 | 
						|
 | 
						|
* Sense (Rows)
 | 
						|
 | 
						|
TODO
 | 
						|
 | 
						|
 | 
						|
 -----
 | 
						|
|Clock|
 | 
						|
 -----
 | 
						|
 | 
						|
PTA18 <-> PTA19
 | 
						|
 | 
						|
 | 
						|
 ---
 | 
						|
|I2C|
 | 
						|
 ---
 | 
						|
 | 
						|
* Main - Connect to all ISSI Chips - Also break out header for debugging
 | 
						|
 | 
						|
PTB0 - SCL0 (add header pin, label as SCL0)
 | 
						|
PTB1 - SDA0 (add header pin, label as SDA0)
 | 
						|
 | 
						|
* Reserved for I2C usage
 | 
						|
 | 
						|
PTC10 - SCL1 (Reserved, can use as GPIO)
 | 
						|
PTC11 - SDA1 (Reserved, can use as GPIO)
 | 
						|
 | 
						|
* ISSI Control (enough pins for 3 chips reserved)
 | 
						|
 | 
						|
PTB17 - INTB Chip 1
 | 
						|
PTB18 - INTB Chip 2 (Reserved, can use as GPIO)
 | 
						|
PTB19 - INTB Chip 3 (Reserved, can use as GPIO)
 | 
						|
 | 
						|
PTB16 - SDB (tied to all Chips, hardware shutdown)
 | 
						|
 | 
						|
 | 
						|
 ---
 | 
						|
|PWM|
 | 
						|
 ---
 | 
						|
 | 
						|
NHD-C12832A1Z-FS(RGB)-FBW-3V
 | 
						|
 | 
						|
PTC1 - K(R)
 | 
						|
PTC2 - K(G)
 | 
						|
PTC3 - K(B)
 | 
						|
 | 
						|
 | 
						|
 ---
 | 
						|
|SPI|
 | 
						|
 ---
 | 
						|
 | 
						|
NHD-C12832A1Z-FS(RGB)-FBW-3V
 | 
						|
 | 
						|
PTC4 - CS1B    - SS1
 | 
						|
PTC5 - SCL     - SCLK
 | 
						|
PTC6 - SDA(SI) - MOSI
 | 
						|
PTC7 - A0  (Not SPI, used for display)
 | 
						|
PTC8 - RST (Not SPI, used for display)
 | 
						|
 | 
						|
 | 
						|
 ---
 | 
						|
|DAC|
 | 
						|
 ---
 | 
						|
 | 
						|
DAC0 (N/C)
 | 
						|
 | 
						|
 | 
						|
 ----
 | 
						|
|UART|
 | 
						|
 ----
 | 
						|
 | 
						|
* Comm - For bi-directional communication between halves
 | 
						|
 | 
						|
PTA1 - RX0 (Master Side)
 | 
						|
PTA2 - TX0 (Master Side)
 | 
						|
 | 
						|
PTE0 - TX1 (Slave Side)
 | 
						|
PTE1 - RX1 (Slave Side)
 | 
						|
 | 
						|
PTD2 - RX2 (UART Debug Header)
 | 
						|
PTD3 - TX2 (UART Debug Header)
 | 
						|
 | 
						|
 | 
						|
 -----
 | 
						|
|Debug|
 | 
						|
 -----
 | 
						|
 | 
						|
* SWD - (Main reflash header)
 | 
						|
 | 
						|
PTA0 (Pull-down)
 | 
						|
PTA3 (Pull-up)
 | 
						|
 | 
						|
* LEDs
 | 
						|
 | 
						|
PTA5 (LED only for PCB, not Teensy)
 | 
						|
 | 
						|
* UARTs
 | 
						|
 | 
						|
PTD2 - RX2 (UART Debug Header, label as RX2)
 | 
						|
PTD3 - TX2 (UART Debug Header, label as TX2)
 | 
						|
 | 
						|
 | 
						|
 ------
 | 
						|
|Unused|
 | 
						|
 ------
 | 
						|
 | 
						|
* GPIO
 | 
						|
 | 
						|
PTA4
 | 
						|
PTA12
 | 
						|
PTA13
 | 
						|
PTB2
 | 
						|
PTB3
 | 
						|
PTB16
 | 
						|
PTB17
 | 
						|
PTB18
 | 
						|
PTB19
 | 
						|
PTC0
 | 
						|
PTC9
 | 
						|
PTC10
 | 
						|
PTC11
 | 
						|
PTD0
 | 
						|
PTD1
 | 
						|
PTD4
 | 
						|
PTD5
 | 
						|
PTD6
 | 
						|
PTD7
 | 
						|
 | 
						|
* Analog
 | 
						|
 | 
						|
TODO
 | 
						|
 |